![]() “Keenetic-1234”, “MyHOME”, etc.) or your car brand (e.g. It’s never called like your home network (e.g. This network usually have name “OBDII WiFi” or “WiFi OBD2” or something like that. You should do this before you try to connect in Car Scanner. Besides, ELM327 uses simple TCP/IP connection, that is usually not affected by iOS version update.Ģ) ELM327 device with Wi-Fi connetion type pretends to be a Wi-Fi access point and creates Wi-Fi network, that you should connect using iOS settings. Car Scanner is always updated to support latest iOS versions. Windows Phone 8 (Bluetooth and WiFi adapters) - development stopped.First of all, you should understand 3 simple things:ġ) Car Scanner supports all iOS versions, even the latest one.Android v4.0 and higher (ELM327 Bluetooth and WiFi adapters).iOS v9.0 and higher (OBDLink MX+, ELM327 BLE and WiFi adapters).Note: only x86/圆4 architecture is supported for Windows. Windows 2000/XP/Vista/7/8/8.1/10 (ELM327-compatible adapters with COM, USB, Bluetooth and WiFi interfaces, J2534 PassThru adapters).FORD MS CAN (only for J2534-2, CANtieCAR, OBDLink EX/MX/MX+, ELS27 or modified ELM327)Īlmost all of modules availabe through supported protocols.FORScan will continue to supportĮLM327 adapters, but some new functionality may be limited or refuse to work on outdated adapters. If possible, please use adapters recommended above (OBDLink, vLinker). Thus we do not recommend any "ELM327" anymore. They have nothing common with the famous "ELM327" brand but name. Besides, majority of the adapters thatĪre being sold under ELM327 trademark have quite dubious quality that dropped a lot in the past: in fact, Relatively good quality, ceased to meet all of the FORScan requirements. Important note: after many years of continued project development, even those of few ELM327 that have ELM327-compatible (fully compatible with original ELM327, please also see important note below).vLinker FD BT, recommended Bluetooth adapter for FORScan Lite for Android.vLinker FS USB, recommended USB adapter for Windows version of FORScan, also for configuration and programming functions.OBDLink MX+ BT, recommended Bluetooth adapter for Lite versions of FORScan (iOS, Android).OBDLink EX USB, recommended USB adapter for Windows version of FORScan, also for configuration and programming functions.Please check for availability of necessary function before purchasing anything. Vehicles other than Ford, Mazda, Lincoln, Mercury are not supported!.Attention: Mazda 7G models (new Mazda 3, CX-30, MX-30, CX-50 etc) are supported partially or not supported at all! ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |